Hakko Digital Soldering Station With Chisel Tip Pack Review

Hakko Digital Soldering Station With Chisel Tip Pack Review

If you’re a crafter or do any minor metal work, then you already know how important it is to have a reliable soldering iron.

These little devices can be used to repair jewelry, electronics, create stained glass pieces, and so much more. If you are looking to purchase a soldering iron for these tasks, you’re going to want to check out the Hakko Digital Soldering Station with Chisel Tip Pack.

Using Digital Soldering Station

In this review, we are going to talk a little more about the features of the Hakko Digital Soldering Station with Chisel Tip Pack, but we are also going to give you an overview of what people who have purchased the soldering iron had to say about their overall experience with it.

Then, we’re going to give you our recommendation on whether or not this soldering iron is something you should consider purchasing to satisfy your soldering needs!

About The Product

The Hakko Digital Soldering Station with Chisel Tip Pack is ESD safe, which means that any possible electrical discharge that may occur while working with the soldering iron is going to dissipate, thus preventing any building up to levels that could be potentially dangerous.

Not only is the device safe to use in that regard, you’ll also appreciate that the device heats up quickly, as the heater output has been increased by 30% in comparison to other models. The soldering iron works on 65 watts of power, so you’ll have enough juice to solder several wires.

Notable features of the Hakko Digital Soldering Station with Chisel Tip Pack include:

  • Digital Soldering Station ESD Safe version with 5 extra tips -T18-D08/D12/D24/D32/S3 tips
  • FX-888D KIT version with 5 extra tips -T18-D08/D12/D24/D32/S3 tips ( 6 total with the iron )
  • Adjustable temperature control
  • Temperature range 120° - 899°F (50° - 480°C)
  • Digital display shows °F or °C
  • Certified Frustration Free

When you are working on your soldering projects, you’ll notice that the Hakko pen is going to be cool to the touch and quite comfortable to hold. You can also switch out the tips (there are six included with this particular set) so you can get that perfect bond that your project requires.

Soldering Tips

Speaking of the tips, the iron uses T18 series because they are known for their excellent heat conductivity. These tips will allow you to solder at a lower set temperature while reducing the thermal impact on whatever you’re working on, as well as prevent tip oxidation which will shorting the life of your soldering tip.

When you’re operating the soldering iron, you’ll notice how simple it is to start working. All you have to press one of the two buttons. The easy to read digital display is clear and displays the temperature, which can range from 120° - 899°F (50° - 480°C), which you can fine tune via the adjustable temperature knob.

What Others Say

When looking at what people had to say about the Hakko Digital Soldering Station with Chisel Tip Pack, we were surprised by the overwhelming positive comments people had to say about the product. People liked how detailed the instruction booklet was and even the novice could use the iron without fault.

Some people mentioned that it looked more like a toy than an actual toy, due to the bright blue and yellow color of the tool. However, when they used the iron, they were impressed by how quickly it was able to heat up and that it was able to solder 10 gauge wires with no problem.

People also commented on how comfortable the soldering pen was to use. They felt that it wasn’t too big or bulky, and they especially liked that it didn’t get hot while working with it. People also commented that the tips that come with the set are useful, as they are different shapes and sizes that are suitable for most jobs.

While the vast majority of reviews on this product was positive, there were a few people who had small issues with the soldering iron station. One of the primary complaints was that they found the unit hard to program. One person said the programming on their unit became so wonky that the tip would heat and they had to reset the entire station.

A small handful of people also commented that their set stopped working shortly after they purchased it. One said their set didn’t work right out of the box, and the replacement died shortly after. While these are isolated instances, it is still worth noting.

Final Verdict

It doesn’t matter if you’re soldering wires to a circuit board, working on a stained glass piece of art, or you are trying to repair your favorite bracelet, a good soldering iron can make all the difference in the world.

Digital Soldering Station with Chisel Tip Pack

The Hakko Digital Soldering Station with Chisel Tip Pack has everything that you. The kit comes with six different tips that you can use for most any job, and the temperature control on this set allows you to adjust the settings so you’re able to get the perfect solder for your project.

If you are a serious crafter or if you work with electronics, then it’s understandable that you’re going to want a quality soldering iron and we feel that this one is going to exceed your expectations. It may be a little costly, as it is priced slightly under $130, but it will more than pay for itself down the road.

We do want to point out that there were a few issues regarding the soldering iron, but because these are isolated problems, it is safe to say that this is a great product and you’ll love working with your new Hakko Digital Soldering Station with Chisel Tip Pack so much that you’ll look forward to your next project!

Our Rating

Leave a Comment: